LTP MPG H20 Polished Tile and Stone Sealer (See Options)

LTP MPG H20 Polished Tile and Stone Sealer (See Options)

Mapei Ultracare Stain Protector W 1lt

Mapei Ultracare Stain Protector W 1lt

LTP Colour Intensifier and Stainblock H20 (See Options)

As low as £16.27
  • Water based Colour enhancing sealer
  • Strongly repels water, oil and grease
  • Provides an enhanced natural finish
  • Allows surface to breathe
  • For interior & exterior use
  • Helps reduce efflorescence
  • Coverage Approx Per litre per coat:
    Lower porosity floors 15m2
    Higher porosity floors 7.5m2
    Polished surfaces 30m2
Availability:
In stock
Only %1 left
Product Code
LTP/42/select
  • Water based impregnating sealer for interior & exterior use:
    For all types of natural and artificial stone, quarry, brick, concrete, paving, honed, rough cut and polished surfaces.
    Directions for use:
    :Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex 1:10 and white nylon scrubber. Rinse well to remove residues and leave to dry (24hrs).
    Rough cut, tumbled, textured or riven surfaces:
    Shake bottle before use.
    Apply generously and evenly using foam roller or paint brush. On more absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated.
    Honed, smooth and polished surfaces:
    Shake bottle before use.
    Apply liberally and evenly using a sealant applicator, lint free cloth, lamb’s wool applicator or sponge. Leave surfaces to dry. Remove any residual sealer if still visible after one hour by rubbing the surface with a microfibre cloth.
    On larger surface areas machines can be used. On vertical surfaces apply from the bottom up
  • More Information
    Product Code LTP/42/select
    Manufacturer LTP